Top 10 common forklift crashes ， forklift operation must pay attention to these matters ！.

Top 10 common forklift crashes ， forklift operation must pay attention to these matters ！.

Blog Article

Don't undervalue the forklift at work. If the operation is not good, there will be major mishaps in mins, and there are several crashes entailing forklifts.

Case 1: The forklift cargo blocked the chauffeur's sight, and the person in front could not be found, resulting in a moving crash.
Instance 2: In order to keep the equilibrium of the forklift when raising heavy goods, the employees used their body weight as the weight, which almost created casualties.
Instance 3: The size of the forklift cargo exceeds the allowable width of the course and holds on the roadside shelf, which practically causes an crash.
Instance 4: Forklift is speeding up and rolls over during a turn.
Instance 5: The forklift motorist did not observe the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift raises the employees illegally, the forklift driver does not put on the safety belt, the forklift lifter falls and the driver is squashed when the forklift rolls over.
Case 7: The forklift vehicle driver did not use a seat belt and dropped from the automobile when it rolled over and was squashed.
Forklift operation should pay attention to these issues ：.

Begin.
1. Prior to starting, observe the surroundings, and after verifying that there are no obstacles that prevent the security of driving, honk the horn initially and then begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge should be secure before beginning.
3. When the forklift starts with a lots, the chauffeur should initially confirm that the tons is secure and trustworthy.
4. The start needs to be slow and consistent.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground need to be kept at 300mm-400mm, and the pole needs to be tilted in reverse. .
2. Do not raise the fork too high when driving. When getting in and leaving the job site or while driving, take care that there will certainly be no challenges overhead. When the lots is traveling, the fork needs to not be elevated too high, which will influence the security of the forklift. .
3. After unloading, the fork must be decreased to the normal driving setting prior to driving. .
4. When transforming, if there are pedestrians or vehicles nearby, the driving signal must be released initially. High-speed sharp turns are restricted. High-speed doglegs will certainly create the vehicle to lose lateral stability and topple. .
5. When the forklift is downhill, it is purely restricted to switch off the flame and slide, and it is forbidden to brake all of a sudden while driving with tons unless there are unique conditions.
6. When the forklift is running, it must obey the traffic rules in the factory and should keep a specific security range from the automobile ahead. .
7. When the forklift is running, the tons should be in the lowest setting that does not impede the driving, and the gantry ought to be correctly tilted back. The load shall not be raised except when piling or filling. .
8. The elevation of the lots need to not obstruct the motorist's sight. In special circumstances, when the item influences the forward vision, drive at a reduced rate when reversing.
9. It is forbidden to turn on the ramp, neither to drive throughout the ramp. .
10. The secure driving speed of the forklift in the factory area is 5 km/h, and it has to drive securely at a low speed when getting in the manufacturing workshop area. .
11. When the forklift is lifted, raised or driven, it is restricted for workers to base on the fork to hold items and play a stabilizing function. .
12. If problems are found, they will certainly be repaired and reported in a timely fashion, and they will never run with health problems or conceal them.

filling and discharging.
1. When fork-loading items, the range between both forks ought to be adjusted as required to make the tons of both forks well balanced and not skewed, and one side of the thing ought to protest the shelf. .
2. It is forbidden to collaborate with a single fork or make use of a fork top or draw. In special situations, safety warning signs must be set up to advise bordering pedestrians. .
3. In the process of loading and unloading things, the forklift should be stopped with the brake. .
4. The speed of the lorry ought to be sluggish and steady. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled things Stand-on Electric Pallet Stacker and hurt people. .
5. When utilizing a fork to fork the goods, the fork must be as deep as feasible under the lots, and it should be noted that the fork suggestion must not touch various other products or objects. The load ought to be supported with very little back tilt of the gantry to make sure that the lots does not slide backwards. The mast can be slanted forward slightly when the lots is decreased to permit very easy positioning of the tons and extraction of the forks. .
6. It is forbidden to fork products at high speed and collide with hard objects with the fork head. .
7. When the forklift is functioning, it is restricted for people to stand around the fork, so regarding prevent the collapse of the goods and harm people. .
8. Overwhelming is prohibited, and it is prohibited to use forks to lift personnel to engage in high-altitude operations to prevent high-altitude falling accidents. .
9. It is not allowed to use the brake inertia to slip, place, round or roll items. .
10. It is not enabled to utilize forks to choose, transform pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the products on the fork are in the air. Before leaving the forklift, you must unload the goods or reduced the fork framework.
2. Pull the hand brake take care of to dead or dispirit the hand brake button.
3. The engine is switched off and the power is removed. (Except for special circumstances, such as the chauffeur does not leave the car's view and does not go beyond 1 min).
4. Stand-on Electric Pallet Stacker Remove the secret. .

Forklift Operation Precautions.
1. Before and after the forklift procedure, the appearance should be checked, and gas, lubing oil and cooling water must be added.
2. Examine the safety efficiency of beginning, running and braking.
3. Examine whether the lights and horn signals are total and reliable.
4. Throughout the operation of the forklift, examine whether the pressure and temperature level are typical.
5. After the forklift is running, the external leak ought to likewise be examined and the seals ought to be changed in time.

Forklift Safety Operation Specifications.
1. You must inspect before leaving the cars and truck;.
2. When you experience a person before you during driving, you need to send a signal at a distance of 5 m;.
3. The driving speed in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the cargo ought to be 0.3 m ~ 0.4 m in the air;.
5. The transforming should not be too sharp to avoid the propensity of " totally free turning";.
6. Running up and down the slope must be slow-moving and consistent, and no activating the incline is permitted.
7. Do not drive throughout the slope. When the slope is above 10%, the vehicle ought to be driven in reverse when worsening;.
8. When the forklift workers bring the goods and move forward, if they come across large or hefty items and most likely to the chauffeur's line of sight, they should take the reversing workout
.
The "Eight Prohibitions" must be complied with in the procedure.
1. Solitary fork operation is not allowed.
2. It is not allowed to raise the goods for long distance driving.
3. It is not enabled to grab the goods by turning over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other harmful chemicals with forks.
5. It is not enabled to make use of inertia force to grab the goods.
6. It is not enabled to make use of stopping pressure to expatriation round or easy-to-roll objects.
7. It is not permitted to bring people to work with the pallet or fork, and it is purely restricted to stand under the fork after the fork is raised.
8. Do not drive laterally on inclines
.
Car parking is not permitted under the following problems.
1. Contours, slim roadways, train crossings;.
2. Areas with a longitudinal incline more than 5%.
3. When there is an barrier on one side of the roadway, the opposite side of the area with the very same length as the barrier should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844